How To Pair Sony Wf Xb700 With Laptop

The operation to register the device that you lot wish to connect to is called "pairing". Offset, pair a device to utilise it with the headset for the offset time.

Before starting the operation, make certain of the following:

Your estimator has a Bluetooth part that supports music playback connections (A2DP).
The calculator is placed within 1 k (3 feet) of the headset.
The headset is charged sufficiently.
The operating instructions of the computer is in manus.
Depending on the estimator you are using, the built-in Bluetooth adaptor may need to be turned on. If you do not know how to turn on the Bluetooth adaptor or are unsure if your computer has a congenital-in Bluetooth adaptor, refer to the operating instructions supplied with the estimator.

Remove both units of the headset from the charging case.

The headset turns on automatically. Check that the indicators (blueish) flash.
Enter pairing mode on this headset.

When you pair the headset with a device for the showtime fourth dimension afterwards purchase or after initializing the headset (if the headset has no pairing data), the headset enters pairing mode automatically if you remove the headset from the charging instance. In this case, keep to step 3.
When you lot pair a second or subsequent device (the headset has pairing information for other devices), press and concord the buttons on both the left and right units for about seven seconds.

Check that the indicator (blue) on the left unit of the headset repeatedly flashes twice in a row.

You volition hear the voice guidance say, "Bluetooth pairing", from the left unit of measurement of the headset.
Wake the calculator up if the figurer is in standby (sleep) or hibernation manner.
Register the headset using the computer.
1. Click the [Start] button, so [Settings].
2. Click [Devices].
3. Click the [Bluetooth] tab, click the [Bluetooth] switch to turn on the Bluetooth office, then select [WF-XB700].
4. Click [Pair].
If Passkey (*) input is required, input "0000".

The headset and reckoner are paired and connected with each other.

Yous will hear the voice guidance say, "Bluetooth connected", from the left unit of measurement of the headset.

If they are not connected, meet "Connecting to a paired computer (Windows 10)".

If [WF-XB700] does not announced on the estimator screen, endeavour once again from the offset of step 4.

Note

If pairing is non established within 5 minutes, pairing mode is canceled, and the headset turns off. In this case, set up the headset into the charging case, and kickoff the performance once more from stride ane.
Once Bluetooth devices are paired, in that location is no need to pair them again, except in the following cases:
- Pairing information has been deleted later on repair, etc.
- When a ninth device is paired.
  The headset tin be paired with upward to 8 devices. If a new device is paired after viii devices are already paired, the registration information of the paired device with the oldest connexion date is overwritten with the data for the new device.
- When the pairing information for the headset has been deleted from the Bluetooth device.
- When the headset is initialized.
  All of the pairing information is deleted. In this example, delete the pairing information for the headset from the device and and so pair them again.
The headset can be paired with multiple devices, but can only play music from one paired device at a fourth dimension.